Basler Electric BE1-700 - Manual (Page 205)

Output Purpose Description Label State Labels
BESTlogic expression: VO14=0
VO15 Alarm Mask 23 VO15 True False
BESTlogic expression: VO15=0
Table 8-15. 700V-OUVF-A-BE (Over/Under V & F Protection) Logic Settings and Equations
SL-N=700V-OUVF-A-BE
SL-24=1,0
SL-27P=1,0;
SL-127P=1,0
SL-27X=0,0
SL-47=1,0
SL-59P=1,0; SL-159P=1,0
SL-59X=2,0; SL-159X=2,0
SL-81=1,0
SL-181=1,0
SL-281=1,0
SL-381=1,0
SL-481=1,0
SL-581=1,0
SL-62=0,0,0
SL-162=0,0,0
SL-GROUP=1,0,0,/0
SL-43=0
SL-143=0
SL-101=0
SL-VOA=ALMMAJ+ALMMIN
SL-VO1=0
SL-VO2=24T+27PT+127PT+27XT+47T+59PT+159PT+59XT+159XT+81T+181T+281T+381T+481T+
581T
SL-VO3=0
SL-VO4=0
SL-VO5=0
SL-VO6=0
SL-VO7=0
SL-VO8=0
SL-VO9=0
SL-VO10=0
SL-VO11=24T+27PT+127PT+27XT+47T+59PT+159PT+59XT+159XT+81T+181T+281T+381T+481T+
581T
SL-VO12=24PU+27PPU+127PPU+27XPU+47PU+59PPU+159PPU+59XPU+159XPU+81T+181T+
281T+381T+ 481T+581T
SL-VO13=0
SL-VO14=0
SL-VO15=0
700V-VF79-A-BE (VOLTAGE PROTECTION WITH RECLOSING) LOGIC SCHEME
(BE1-700V)
Voltage protection including volts/hertz, negative-sequence voltage, phase and neutral over/undervoltage,
and over/underfrequency are also included. Network and dead line reclosing (25 and 25VM) with a four
shot automatic recloser, including a separate pilot and time delay reclose initiate round out the
application.
Figures 8-8 and 8-9 make up the logic drawings representing the logic settings and equations shown in
Table 8-20. Figure 8-10 is a one-line drawing. Table 8-20 is part of a setting printout that can be
generated from BESTCOMS by using the Print command. These are the actual ASCII commands,
9376700990 Rev M BE1-700 Application 8-23