Basler Electric BE1-700 - Manual (Page 22)

59X Auxiliary Overvoltage Protection (BE1-700V)
Pickup
Setting Range: 1 to 150 V
Accuracy: ±2% of setting or ±1 V, whichever is greater
Dropout/Pickup Ratio: 98%
Time Delay
Setting Range: 0.050 to 600 s
Accuracy:
±0.5% or ±2.5 cycles, whichever is greater
60FL Fuse Loss (BE1-700V)
Time Delay: Fixed at 50 ms
62 Logic Timers
Modes: Pickup/Dropout, 1 Shot Nonretriggerable, 1 Shot
Retriggerable, Oscillator, Integrating, Latch
Setting Range: 0 to 9,999 s
Accuracy: ±0.5% or ±12 ms, whichever is greater
79 Recloser Protection
Reclose (791, 792, 793, 794), Reset (79R), Max Cycle (79M), Reclose Fail (79F), Pilot (79P)
Setting Range: 100 ms to 600 s
Accuracy:
±0.5% or +1¾, –0 cycles, whichever is greater
81 Over/Under Frequency Protection (BE1-700V)
Pickup
Setting Range: 20 to 70 Hz
Accuracy:
±0.01 Hz
Dropout : 0.02 Hz
±0.01 Hz of the actual pickup value
Time Delay
Setting Range: 0.00 to 600 s
Accuracy:
±0.5% or ±1 cycle, whichever is greater, plus 3
cycle recognition time
Voltage Inhibit
Setting Range: 15 to 300 V
Accuracy:
±2% or ±1 V, whichever is greater
Automatic Setting Group Characteristics
Number of Setting Groups: 2
Control Modes
Automatic: Cold-Load Pickup, Dynamic Load or Unbalance,
Recloser Shot, or Unbalance (BE1-700C); Fuse
Loss (60FL) (BE1-700V)
External: Discrete Input Logic, Binary Input Logic
Switch Level
Setting Range: 0 to 150% of the Setting Group 0, monitored
element setting
Accuracy: ±2% or ±50 mA (5 A), ±2% or ±10 mA (1 A)
Switch Timer
Setting Range: 0 to 60 min with 1 min increments where 0 =
disabled
Accuracy:
±0.5% or ±2 s, whichever is greater
1-10 BE1-700 General Information 9376700990 Rev M