Basler Electric BE1-700 User Manual
Page 405
most important information from the protection and control relays. This web page is created by the BE1-
700 relay and provides the following "read-only" information.
• General Status
o
Relay Trouble
o
Major Alarm
o
Minor Alarm
o
Logic Alarm
o
Targets
o
Breaker
o
Recloser (status)
• System Info
o
Relay ID
o
Station ID
• Networking Settings
o
MAC (address)
o
E-mail (server)
o
DHCP (mode)
o
IP Address
o
IP Subnet Mask
o
IP Gateway
• Version Info
o
Model Number
o
Style Number
o
App Program (firmware version)
o
Boot Program (firmware version)
o
Serial Number
None of the above settings can be changed from within the web page but some can be changed through
the BE1-700 front panel human-machine interface (HMI) or through a PC using BESTCOMS. Refer to
other sections in the instruction manual for details. Network settings can be changed by the company
network administrator or through BESTCOMS as was discussed previously in this section. The Status
web page is also the location from which other web-based features are launched, as is discussed in the
following paragraphs.
9376700990 Rev M
BE1-700 BESTnet Communication
15-13