Table b-4), Table b-5), M (table b-6) – Basler Electric BE1-700 User Manual
Page 442
Table B-4. Report Commands
Type
ASCII Command
Function
HMI
Screen
RA[=0]
Report/Reset alarm information.
1.3
RA-LGC[=0]
Report/Reset logic alarm information.
N/A
RA-MAJ[=0]
Report/Reset major alarm information.
N/A
RA-MIN[=0]
Report/Reset minor alarm information.
N/A
RA-REL[=0]
Report/Reset relay alarm information.
N/A
RB
Read breaker status.
1.5.6
C
RB-DUTY[<phase>[=%duty>]
Read/Set breaker contact duty log.
4.3.2
RB-OPCNTR[=<#operations>]
Read/Set breaker operation counter.
4.3.1
C
RD
Report all demand data.
N/A
C
RD-PI<p>[=0]
Read/Reset peak demand current.
4.4.3.1 -
4.4.3.5
C
RD-TI[<p>]
Report today’s demand current.
4.4.1.1 -
4.4.1.5
C
RD-YI[<p>]
Report yesterday’s demand current.
4.4.2.1 -
4.4.2.5
RF[-n/NEW][=0/TRIG]
Read/Reset fault report data.
N/A
RG
Report general information.
N/A
RG-DATE[={M/D/Y}] or RG-
DATE[={D-M-Y}]
Read/Set date.
4.6
RG-DST
Report Start/Stop Times and Dates for Daylight
Savings Time referenced to local time.
N/A
RG-STAT
Report relay status.
N/A
RG-TARG[=0]
Report/Reset target status.
1.2
RG-TIME[=hr:mn:sc] or RG-
TIME[=hr:mn<f>sc]
Report/Set time.
4.6
RG-VER
Read program version, model number, style
number, and serial number.
4.7
RO-nA/B[#].CFG/DAT
Read oscillographic COMTRADE fault report.
N/A
RS[-n/Fn/ALM/IO/LGC/NEW][=0]
Read/Reset Sequence of Events Record Data.
N/A
Table B-5. Setting Command
Type
ASCII Command
Function
HMI Screen
S
Read all relay setting parameters.
N/A
Table B-6. Alarm Setting Commands
Type
ASCII Command
Function
HMI Screen
SA
Read all major and minor alarm setting.
N/A
V
SA-24[=<alarm level>,time delay>]
Read/Set Volts Per Hertz alarm settings.
N/A
SA-BKR<n>[=<mode>,<alarm limit>]
Read/Set breaker alarm settings.
N/A
SA-DI<p>[=<alarm level>]
Read/Set demand alarm settings.
N/A
SA-LGC[=<alarm num 1>[/<alarm num 2>]…
[<alarm num n>]]
Read/Set logic alarm setting mask.
N/A
SA-MIN[=<alarm num 1>[/<alarm num 2>]…
[<alarm num n>]]
Read/Set minor alarm setting mask.
N/A
SA-MAJ[=<alarm num 1>[/<alarm num 2>]…
[<alarm num n>]]
Read/Set major alarm setting mask.
N/A
SA-RESET[=<rst alm logic>]
Read/Set programmable alarms reset logic.
N/A
B-2
BE1-700 Command Cross-Reference
9376700990 Rev M