Basler Electric BE1-700 - Manual (Page 6)

Manual
Revision and Date Change
C, 10/08
• Added manual part number and revision to footers.
• Changed Appendix C, Overexcitation (24) Inverse Time Curves, to
Appendix D.
• Created Appendix C, Terminal Communication.
• Added GOST-R certification to Section 1.
• Combined BE1-700C and BE1-700V style charts into one style chart,
Figure 1-1.
• Changed 81 function pickup range from 40-70 to 20-70 Hz.
• Added Frequency Range to Power Supply specifications.
• Updated all BESTCOMS screenshots to Windows XP style.
• Added explanation of Inhibit setting for 27P/27X function in Section 4.
• Changed 25 function delta angle setting from 1-45 to 1-99.
• Added Figure 6-7, Breaker Monitoring Tab, and Figure 6-8,
BESTlogic Screen for Breaker Duty Monitoring.
• Added style number and firmware version display to fault reports
under Fault Reporting in Section 6.
• Added Settings Compare in Section 6.
• Added 127PPU and 127PT to Table 7-1, Logic Variable Names and
Descriptions.
• Added explanation of Figure 9-2, Show Passwords Screen.
• Added Figure 10-7 showing additional fault report screens.
• In Section 11, ASCII Command Interface, added descriptions for SA-
24, SG-DSP, SG-EMAIL, SG-VTP, SG-VTX, SL-27, SL-47, SL-59,
S<g>-24D, S<g>-25VM, S<g>-27, S<g>-47, S<g>-81, S<g>-81INH,
and SP-60FL.
• Added Figure 12-17, RS-232 Pin-outs.
• Added 27P/127P/27X Inhibit Pickup Test in Section 13.
• In Section 15, updated Configuration and Web Page screenshots
using Windows XP.
B, 10/04
• Annotated each section, sub-section, figure, and table to indicate
applicability to a current (BE1-700C) or voltage (BE1-700V) relay, as
appropriate.
• Updated the discussion of the 24 element in Section 4, Protection and
Control.
• Added Table 6-14, Targets as Displayed to Section 6, Reporting and
Alarm Functions.
• Updated Figure 10-7, Protection Menu Branch Structure.
• Increased the number of figures in Section 14, BESTCOMS Software
from 16 to 42.
• Added a troubleshooting guide to Section 15, BESTNet
Communication.
• Added voltage ASCII commands to Appendix B, Command Cross-
Reference.
• Added Appendix C, Overexcitation (24) Inverse Time Curves (BE1-
700V Only).
A, 07/04 • Initial release
iv BE1-700 Introduction 9376700990 Rev M