Basler Electric BE1-700 - Manual (Page 32)

1. At the top level of the menu tree, use the LEFT or RIGHT scrolling pushbuttons to get to the
PROTECTION logic branch (Screen 5).
2. Press the DOWN scrolling pushbutton to reach the SETTING GROUP level (Screen 5.1).
3. Scroll RIGHT to SETTING GROUP 1 branch (Screen 5.2).
4. From Screen 5.2, scroll down to the next level of detail which is the 24 SETTINGS (Screen 5.2.1).
5. Scroll right to the 47 SETTINGS (Screen 5.2.5) and then down to reach the 47 pickup and time
delay settings (Screen 5.2.5.1).
Figure 2-2. Menu Screens Numbering Example
ASCII Command Communications
The BE1-700 relay has two independent communications ports for serial communications plus one
optional rear Ethernet port. A computer terminal or PC running a terminal emulation program such as
Windows HyperTerminal can be connected to any of the ports so that commands can be sent to the relay.
Communication with the relay uses a simple ASCII command language. When a command is entered via
a serial port, the relay responds with the appropriate action. ASCII command communication is designed
for both human-to-machine interactions and batch download type operations. The following paragraphs
briefly describe the command structure and discuss human-to-machine interactions and batch command
text file operations. The operation of the ASCII commands is described in detail in Section 11, ASCII
Command Interface.
Command Structure
An ASCII command consists of a command string made up of one or two letters followed by a hyphen
and an object name. The first letter specifies the general command function and the second a sub-group.
The object name is the specific function for which the command is intended. A command string entered
alone is a read command. A command string followed by an equal sign and one or more parameters is a
write command. The general command groups are organized into five major groups plus several
miscellaneous commands. These commands are as follows:
C CONTROL. Commands to perform select before operate control actions such as tripping and closing
the circuit breaker, changing the active setting group, etc. Subgroups include S for Select and O for
Operate.
G GLOBAL. Perform global operations that do not fall into the other general groups such as password
security. Subgroups include: S for security settings.
M METERING. Read all real time metering values. This general command group has no subgroups.
P PROGRAM. Subgroup command to read or program a setting.
R REPORTS. Read and reset reporting functions such as time and date, demand registers, breaker
duty statistics, etc. Subgroups include: A for Alarm functions, B for Breaker monitoring functions, D
for Demand recording functions, F for Fault summary reporting functions, G for General information,
and S for sequence of events recorder functions.
2-4 BE1-700 Quick Start 9376700990 Rev M