Basler Electric BE1-700 - Manual (Page 212)

Table 8-20. 700V-VF79-A-BE (V & F Protection with Reclosing) Logic Settings and Equations
SL-N=700V-VF79-A-BE
SL-24=1,0
SL-25=1,/79C+79LO
SL-27P=1,0;
SL-127P=1,0
SL-27X=0,0
SL-47=1,0
SL-59P=1,0;
SL-159P=1,0
SL-59X=2,0; SL-159X=2,0
SL-81=1,0
SL-181=1,0
SL-281=1,0
SL-381=1,0
SL-481=1,0
SL-581=1,0
SL-62=0,0,0
SL-162=0,0,0
SL-79=1,VO14,/IN1,VO12,/IN2,VO13
SL-GROUP=1,0,0,/0
SL-43=0
SL-143=0
SL-101=0
SL-VOA=ALMMAJ+ALMMIN
SL-VO1=0
SL-VO2=24T+27PT+127PT+27XT+47T+59PT+159PT+59XT+159XT+81T+181T+281T+381T+481T+
581T
SL-VO3=79P+VO9+VO10
SL-VO4=0
SL-VO5=0
SL-VO6=0
SL-VO7=0
SL-VO8=0
SL-VO9=79C*25
SL-VO10=79C*25VM1
SL-VO11=24T+27PT+127PT+27XT+47T+59PT+159PT+59XT+159XT+81T+181T+281T+381T+481T+
581T
SLVO12=24PU+27PPU+127PPU+27XPU+47PU+59PPU+159PPU+59XPU+159XPU+81T+181T+
281T+ 381T+481T+581T
SL-VO13=IN4
SL-VO14=IN3+VO13
SL-VO15=0
MISCELLANEOUS LOGIC EXPRESSIONS
Several logic expression settings are classified as miscellaneous. That is, they are not included in the
BESTlogic settings and are not set through the ASCII command interface using the SL (Set Logic)
commands. Several of the reporting and alarm functions provided in the relay require programmable logic
expressions to determine their functionality. These settings are included with the setup parameters
associated with each function. Table 8-21 cross-references the manual sections and setting commands
associated with these non-BESTlogic logic settings.
Each of the pre-programmed logic schemes is designed to be compatible with the factory default logic
expression settings for these reporting and alarm functions. However, when copying a pre-programmed
scheme into your logic settings for modification, it is important to recognize that settings will not be copied
in for these logic settings. These miscellaneous logic settings must be reviewed to ensure desired
performance for these functions.
8-30 BE1-700 Application 9376700990 Rev M