H3C Technologies H3C SecPath F1000-E User Manual
Page 109
84
Task Remarks
Configuring path costs of ports
Optional.
Optional.
Configuring the port link type
Optional.
Configuring the mode a port uses to recognize/send
MSTP packets
Optional.
Enabling the spanning tree feature
Required.
Optional.
Configuring protection functions
Optional.
Complete the following tasks to configure MSTP:
Task Remarks
Configuring the root
bridge
Setting the spanning tree mode
Optional.
By default, the device works
in MSTP mode.
Required.
Configuring the root bridge or a secondary root
bridge
Optional.
Configuring the device priority
Optional.
Configuring the maximum hops of an MST region
Optional.
Configuring the network diameter of a switched
network
Optional.
Configuring spanning tree timers
Optional.
Configuring the timeout factor
Optional.
Configuring the maximum port rate
Optional.
Optional.
Configuring the port link type
Optional.
Configuring the mode a port uses to recognize/send
MSTP packets
Optional.
Enabling the spanning tree feature
Required.
Configuring the leaf
nodes
Setting the spanning tree mode
Optional.
By default, the device works
in MSTP mode.
Required.
Configuring the device priority
Optional.
Configuring the timeout factor
Optional.
Configuring the maximum port rate
Optional.
Optional.
Configuring path costs of ports
Optional.