H3C Technologies H3C SecPath F1000-E - Manual (Page 261)

236
Figure 147 Configuring DDNS
2. Enter 3322 in Domain Name.
3. Select 3322.org from the Server Provider list.
4. Enter steven in Username.
5. Enter nevets in Password.
6. Select GigabitEthernet0/1 from the Associated Interface list.
7. Enter whatever.3322.org in FQDN.
8. Click Apply.
Verifying the configuration
After the preceding configuration is completed, the SecPath will notify the DNS server of its new domain
name-to-IP address mapping through the DDNS server provided by www.3322.org whenever its IP
address changes. Therefore, the SecPath can always provide Web service at whatever.3322.org.
Configuring DDNS at the CLI
DDNS client configuration task list
Task Remark
Configuring a DDNS policy Required
Applying the DDNS policy to an interface Required