H3C Technologies H3C SecPath F1000-E User Manual
Page 36
Advertising
11
Figure 8 Assigning VLAN-interface 1 to a security zone
•
Select Vlan-interface1 from the Interface Name area.
•
Click Apply.
Host A and Host B can access the SecPath.
# Display the statistics on interface GigabitEthernet 0/1.
•
Select Device Management > Interface from the navigation tree.
•
Click interface name GigabitEthernet0/1 to view its statistics, as shown in
Advertising
This manual is related to the following products: