Configuring static name resolution entries, Configuring dynamic domain name resolution – H3C Technologies H3C SecPath F1000-E User Manual
Page 241
216
Configuring static name resolution entries
Select Network > DNS > Static from the navigation tree to enter the static domain name resolution
configuration page, as shown in
. Click Add to enter the page shown in
.
Figure 123 Static domain name resolution configuration page
Figure 124 Creating a static domain name resolution entry
Table 36 Configuration items
Item Description
Host Name
Host name
IMPORTANT:
Each host name corresponds to one IP address only.
If you configure multiple IP addresses for a host
name, the last configured one takes effect.
Host IP Address
IP address that corresponds to the
host name
Configuring dynamic domain name resolution
Select Network > DNS > Dynamic from the navigation tree to enter the dynamic domain name resolution
configuration page, as shown in
.