H3C Technologies H3C SecPath F1000-E - Manual (Page 469)

444
Figure 277 Tabs on the BGP peer configuration page
2. Click Add on the Peer Configuration tab.
The BGP peer configuration page appears.
Figure 278 Creating a BGP peer
3. Configure the parameters as described in Table 68 .
Table 68 Configuration items
Item Description
Peer IP Address Configure the IP address of the BGP peer.
Peer AS Specify the AS number of the BGP peer.
Displaying BGP peer information
1. Select Network > Routing Management > BGP from the navigation tree.
The BGP configuration page appears.
2. After you complete BGP peer configurations, click Show Peer on the Show Information tab.