H3C Technologies H3C SecPath F1000-E - Manual (Page 556)

531
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
10.1.1.0/24 10 NULL GE0/2 Direct D/L/-
10.1.2.0/24 10 NULL GE0/1 Direct D/L/-
192.168.0.0/24 10 NULL GE0/3 Direct D/L/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
10.1.1.0/24 10 NULL GE0/2 Direct D/L/-
10.1.2.0/24 10 NULL GE0/1 Direct D/L/-
192.168.0.0/24 10 NULL GE0/3 Direct D/L/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
[SecPath] display isis route
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
192.168.0.0/24 10 NULL GE0/2 Direct D/L/-
10.1.1.0/24 20 NULL GE0/2 192.168.0.1 R/-/-
10.1.2.0/24 20 NULL GE0/2 192.168.0.1 R/-/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
3. Configure RIPv2 on SecPath and Router D, and configure route redistribution from RIP to IS-IS on
SecPath:
# Configure RIPv2 on SecPath.
[SecPath] rip 1
[SecPath-rip-1] network 10.0.0.0
[SecPath-rip-1] version 2
[SecPath-rip-1] undo summary
# Configure RIPv2 on Router D.
[RouterD] rip 1
[RouterD-rip-1] network 10.0.0.0
[RouterD-rip-1] version 2