H3C Technologies H3C SecPath F1000-E User Manual
Page 662
637
Scope: Not scoped
Uptime: 00:40:40
Expires: 00:01:42
# Display BSR information and the locally configured C-RP information in effect on SecPath B.
[SecPathB] display pim bsr-info
Elected BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Accept Preferred
Scope: Not scoped
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 192.168.4.2
Priority: 10
Hash mask length: 32
State: Candidate
Scope: Not scoped
Candidate RP: 192.168.4.2(GigabitEthernet0/3)
Priority: 192
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:34
# Display BSR information and the locally configured C-RP information in effect on SecPath C.
[SecPathC] display pim bsr-info
Elected BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Elected
Scope: Not scoped
Uptime: 00:01:18
Next BSR message scheduled at: 00:01:52
Candidate BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Elected
Scope: Not scoped
Candidate RP: 192.168.9.2(GigabitEthernet0/3)
Priority: 192
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
To display RP information on a firewall, use the display pim rp-info command. For example:
# Display RP information on SecPath A.
[SecPathA] display pim rp-info
PIM-SM BSR RP information:
Group/MaskLen: 225.1.1.0/24
RP: 192.168.4.2