H3C Technologies H3C SecPath F1000-E - Manual (Page 246)

221
Configuring the DNS client
# Enable dynamic domain name resolution.
• Select Network > DNS > Dynamic from the navigation tree, and perform the following operations,
as shown in
Figure 132 .
Figure 132 Enabling dynamic domain name resolution
• Select the Enable option for Dynamic DNS.
• Click Apply.
# Configure the DNS server address.
• Select Network > DNS > Dynamic from the navigation tree, and then click Add IP. Perform the
following operations, as shown in
Figure 133 .
Figure 133 Configuring a DNS server address
• Enter 2.1.1.2 in DNS Server IP Address.
• Click Apply.
# Configure the domain name suffix.
• Select Network > DNS > Dynamic from the navigation tree, and then click Add Suffix. Perform the
following operations, as shown in
Figure 134 .