H3C Technologies H3C SecPath F1000-E - Manual (Page 192)

167
Task Remarks
Applying an extended address pool on an interface
Required by the extended address pool
configuration
When you configure a common
address pool, ignore this task.
Configuring the DHCP server security functions Optional
Enabling Option 82 handling Optional
Specifying the threshold for sending trap messages Optional
Configuring an address pool on the DHCP server
Configuration task list
Complete the following tasks to configure an address pool:
Task Remarks
Creating a DHCP address pool Required
Configuring an address
allocation mode for a
common address pool Configuring static address allocation Required to configure either
of the two for the common
address pool configuration
Configuring dynamic address allocation
Configuring dynamic address allocation for an extended address pool
Required for the extended
address pool configuration
Configuring a domain name suffix for the client
Optional
Configuring DNS servers for the client
Configuring WINS servers and NetBIOS node type for the client
Configuring BIMS server information for the client
Configuring gateways for the client
Configuring Option 184 parameters for the client with voice service
Configuring the TFTP server and bootfile name for the client
Configuring self-defined DHCP options
Creating a DHCP address pool
When creating a DHCP address pool, specify it as a common address pool or an extended address
pool.
To create a DHCP address pool:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a DHCP address pool
and enter its view. dhcp server ip-pool pool-name
[ extended ] No DHCP address pool is created by
default.