H3C Technologies H3C SecPath F1000-E - Manual (Page 810)

785
Task Remarks
Configuring a preferred value for routes from a
peer/peer group
Optional
Specifying the source interface for establishing TCP
connections
Optional
Allowing the establishment of a non-direct EBGP
connection
Optional
Configuring a description for an IPv6 peer/peer
group
Optional
Disabling session establishment to an IPv6
peer/peer group
Optional
Logging IPv6 peer/peer group state changes Optional
Controlling route distribution
and reception
Configuring IPv6 BGP route redistribution Optional
Configuring IPv6 BGP route summarization Optional
Advertising a default route to an IPv6 peer/peer
group
Optional
Configuring outbound route filtering Optional
Configuring inbound route filtering Optional
Configuring IPv6 BGP and IGP route
synchronization
Optional
Configuring route dampening Optional
Configuring IPv6 BGP route
attributes
Configuring IPv6 BGP preference and default
LOCAL_PREF and NEXT_HOP attributes
Optional
Configuring the MED attribute Optional
Configuring the AS_PATH attribute Optional
Tuning and optimizing IPv6
BGP networks
Configuring IPv6 BGP timers Optional
Configuring IPv6 BGP soft reset Optional
Enabling the IPv6 BGP ORF capability Optional
Enabling 4-byte AS number suppression Optional
Configuring the maximum number of
load-balanced routes
Optional
Enabling MD5 authentication for TCP connections Optional
Applying an IPsec policy to an IPv6 BGP peer or
peer group
Optional
Configuring a large scale IPv6
BGP network
Configuring IPv6 BGP peer group Optional
Configuring IPv6 BGP community Optional
Configuring an IPv6 BGP route reflector Optional
Configuring BFD for IPv6 BGP Optional