H3C Technologies H3C SecPath F1000-E - Manual (Page 619)

594
Task Command Remarks
Display information about the hosts
tracked by IGMP on an interface.
display igmp host interface
interface-type interface-number group
group-address [ source
source-address ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display IGMP information.
display igmp interface [ interface-type
interface-number ] [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display information about IGMP
proxying groups.
display igmp proxying group
[ group-address ] [ verbose ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view
Display information about the IGMP
routing table.
display igmp routing-table
[ source-address [ mask { mask |
mask-length } ] | group-address [ mask
{ mask | mask-length } ] | flags { act |
suc } ] * [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display IGMP SSM mappings.
display igmp ssm-mapping
group-address [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display information about the multicast
groups created from IGMPv1 and
IGMPv2 reports based on the
configured IGMP SSM mappings.
display igmp ssm-mapping group
[ group-address | interface
interface-type interface-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display information about the hosts
that join the group based on IGMP
SSM mappings on an interface.
display igmp ssm-mapping host
interface interface-type
interface-number group group-address
source source-address [ | { begin |
exclude | include } regular-expression ]
Available in any view
Remove all the dynamic IGMP group
entries of a specified IGMP group or all
IGMP groups.
reset igmp group { all | interface
interface-type interface-number { all |
group-address [ mask { mask |
mask-length } ] [ source-address [ mask
{ mask | mask-length } ] ] } }
Available in user view
Clear IGMP SSM mappings.
reset igmp ssm-mapping group { all |
interface interface-type
interface-number { all | group-address
[ mask { mask | mask-length } ]
[ source-address [ mask { mask |
mask-length } ] ] } }
Available in user view
NOTE:
The reset igmp group command cannot remove static IGMP group entries.