Packet filtering configuration example, Network requirements, Configuration procedure – H3C Technologies H3C SecPath F1000-E User Manual
Page 337
Advertising
312
Packet filtering configuration example
Network requirements
As shown in
, configure a QoS policy to filter the incoming packets whose TCP source port is
not 21 on GigabitEthernet 0/1.
Figure 214 Network diagram
Configuration procedure
1.
Configure ACLs:
# Create ACL 3000, and configure a rule to match packets whose TCP source port is not 21.
{
Select Firewall > ACL from the navigation tree, and click Add. Perform configuration on the
page shown in
.
Figure 215 Creating ACL 3000
{
Enter 3000 as the ACL number.
{
Select Config from the Match Order list.
{
Click Apply.
{
Click the
icon for ACL 3000 on the ACL list, and click Add. Perform configuration on the
page shown in
.
Advertising
This manual is related to the following products: