H3C Technologies H3C SecPath F1000-E User Manual

Page 163

Advertising
background image

138

[Router-luser-user2] service-type ppp

[Router-luser-user2] quit

# Configure virtual template 1.

[Router] interface virtual-template 1

[Router-Virtual-Template1] ppp authentication-mode chap

[Router-Virtual-Template1] ppp chap user user1

[Router-Virtual-Template1] ip address 1.1.1.1 255.0.0.0

[Router-Virtual-Template1] remote address 1.1.1.2

[Router-Virtual-Template1] quit

# Configure the PPPoE server.

[Router] interface GigabitEthernet 0/1

[Router- GigabitEthernet 0/1] pppoe-server bind virtual-template 1

2.

Configure SecPath as the PPPoE client:

<SecPath> system-view

[SecPath] dialer-rule 1 ip permit

[SecPath] interface dialer 1

[SecPath-Dialer1] dialer user user2

[SecPath-Dialer1] dialer-group 1

[SecPath-Dialer1] dialer bundle 1

[SecPath-Dialer1] ip address ppp-negotiate

[SecPath-Dialer1] ppp chap user user2

[SecPath-Dialer1] quit

[SecPath] local-user user1

[SecPath-luser-user1] password simple hello

[SecPath-luser-user1] quit

# Configure the PPPoE session.

[SecPath] interface GigabitEthernet 0/1

[SecPath-GigabitEthernet 0/1] pppoe-client dial-bundle-number 1

Advertising
This manual is related to the following products:

H3C SecPath F5000-A5 Firewall, H3C SecPath F1000-A-EI, H3C SecPath F1000-E-SI, H3C SecPath F1000-S-AI, H3C SecPath F5000-S Firewall, H3C SecPath F5000-C Firewall, H3C SecPath F100-C-SI, H3C SecPath F1000-C-SI, H3C SecPath F100-A-SI, H3C SecBlade FW Cards, H3C SecBlade FW Enhanced Cards, H3C SecPath U200-A U200-M U200-S, H3C SecPath U200-CA U200-CM U200-CS, H3C SecBlade LB Cards, H3C SecPath L1000-A Load Balancer

Popular Brands
Popular manuals