H3C Technologies H3C SecPath F1000-E - Manual (Page 218)

193
a. Select Network > DHCP > DHCP Relay from the navigation tree and perform the following
configuration, as shown in Figure 113 .
Figure 113 Enabling the DHCP service
b. Select the Enable option in the DHCP Service field.
c. Click Apply.
# Configure a DHCP server group.
a. In the Server Group field, click Add and perform the following configuration, as shown
in Figure 114 .
Figure 114 Creating a DHCP server group
b. Enter 1 for Server Group ID.