H3C Technologies H3C SecPath F1000-E User Manual
Page 873
Advertising
848
CAUTION:
•
The reset command clears the information in the IPv6 multicast routing table or the multicast forwarding
table, and thus might cause transmission failure of IPv6 multicast information.
•
When a routing entry is deleted from the IPv6 multicast routing table, the corresponding forwarding
entry will also be deleted from the IPv6 multicast forwarding table.
•
When a forwarding entry is deleted from the IPv6 multicast forwarding table, the corresponding routing
entry will also be deleted from the IPv6 multicast routing table.
Advertising
This manual is related to the following products: