H3C Technologies H3C SecPath F1000-E - Manual (Page 949)

924
Step Command Remarks
3. Set the AS-PATH attribute for
BGP routing information. apply as-path as-number&<1-10>
[ replace ] Optional.
Not set by default.
4. Delete the community attribute
of BGP routing information
using the community list.
apply comm-list { comm-list-number
| comm-list-name } delete Optional.
Not configured by default.
5. Set the community attribute for
BGP routing information.
apply community { none | additive
| { community-number&<1-16> |
aa:nn&<1-16> | internet |
no-advertise | no-export |
no-export-subconfed } *
[ additive ] }
Optional.
Not set by default.
6. Set a cost for routing
information.
apply cost [ + | - ] value
Optional.
Not set by default.
7. Set a cost type for routing
information. apply cost-type [ external | internal
| type-1 | type-2 ]
Optional.
Not set by default.
Only F5000-A5 supports the
external and internal keywords.
8. Set the next hop.
• Set the next hop for IPv4 routes:
apply ip-address next-hop
ip-address
• Set the next hop for IPv6 routes:
apply ipv6 next-hop
ipv6-address
Optional.
Not set by default.
The setting does not apply to
redistributed routing information.
9. Set the local preference for
BGP routing information.
apply local-preference preference
Optional.
Not set by default.
10. Set the origin attribute for BGP
routing information.
apply origin { egp as-number | igp
| incomplete }
Optional.
Not set by default.
11. Set the preference for the
routing protocol.
apply preference preference
Optional.
Not set by default.
12. Set a preferred value for BGP
routing information. apply preferred-value
preferred-value Optional.
Not set by default.
13. Set a tag value for RIP, OSPF or
IS-IS routing information.
apply tag value
Optional.
Not set by default.
NOTE:
•
The difference between IPv4 and IPv6 apply clauses is the command for setting the next hop for routing
information.
• The apply ip-address next-hop and apply ipv6 next-hop commands do not apply to redistributed IPv4
and IPv6 routes, respectively.
Defining a continue clause
Follow these guidelines when you define a continue clause: