Configuring the pppoe client at the cli – H3C Technologies H3C SecPath F1000-E User Manual
Page 159
Advertising
134
Figure 71 Summary information about a PPPoE client session
# View information about the dialer interface on the PPPoE client.
•
Select Device Management > Interface from the navigation tree. (Alternatively, you can do that after
selecting Network > PPPoE > Client.)
•
As shown in
, the Dialer 1 interface already obtains an IP address assigned by the PPPoE
server.
Figure 72 Dialer interface information
Configuring the PPPoE client at the CLI
PPPoE client configuration includes dialer interface configuration and PPPoE session configuration.
Advertising
This manual is related to the following products: