H3C Technologies H3C SecPath F1000-E - Manual (Page 341)

316
{
When OK appears, click Close.
4. Configure a QoS policy:
# Create a policy named policy, and configure class-behavior associations in the policy.
{
Select Firewall > QoS > Policy from the navigation tree, and click Add. Perform configuration on
the page shown in
Figure 222 .
Figure 222 Creating a policy named policy
{
Enter policy as the policy name.
{
Click Apply.
{
Select policy from the Policy Name list and then click Add Relation. Perform configuration on the
page shown in
Figure 223 .
Figure 223 Configuring class-behavior associations for the policy named policy
{
Select classifier_1 from the Classifier Name list.
{
Select behavior_1 from the Behavior Name list.
{
Click Apply.
5. Apply the policy to an interface:
# Apply the policy named policy to the incoming packets of GigabitEthernet 0/1.
{
Select Firewall > Traffic Policing > Apply from the navigation tree, and click Apply Policy.
Perform configuration on the page shown in
Figure 224 .
Figure 224 Applying the policy named policy to the incoming packets of GigabitEthernet 0/1
{
Select GigabitEthernet 0/1 from the Interface Name list.