H3C Technologies H3C SecPath F1000-E - Manual (Page 336)

311
Figure 212 Configuring class-behavior associations for policy policy_server
{
Select class_dbserver from the Classifier Name list.
{
Select behavior_dbserver from the Behavior Name list.
{
Click Apply.
{
Select policy_server from the Policy Name list above the policy list and then click Add Relation.
Perform configuration on the page shown in
Figure 212 .
{
Select class_mserver from the Classifier Name list.
{
Select behavior_mserver from the Behavior Name list.
{
Click Apply.
{
Select policy_server from the Policy Name list above the policy list and then click Add Relation.
Perform configuration on the page shown in
Figure 212 .
{
Select class_fserver from the Classifier Name list.
{
Select behavior_fserver from the Behavior Name list.
{
Click Apply.
5. Apply the policy to an interface:
# Apply policy policy_server to the outgoing packets of GigabitEthernet 0/2.
{
Select Firewall > QoS > Apply from the navigation tree and then click Apply Policy. Perform
configuration on the page shown in Figure 213 .
Figure 213 Applying policy policy_server to the outgoing packets of GigabitEthernet 0/2
{
Select interface GigabitEthernet 0/2 from the Interface Name list.
{
Select policy_server from the Policy Name list.
{
Select Outbound from the Direction list.
{
Click Apply.