H3C Technologies H3C SecPath F1000-E - Manual (Page 329)

304
{
Click Apply.
{
Select policy from the Policy Name list and then click Add Relation. Perform configuration on the
page shown in
Figure 201 .
Figure 201 Configuring class-behavior associations for the policy named policy
{
Select classifier_server from the Classifier Name list.
{
Select behavior_server from the Behavior Name list.
{
Click Apply.
{
Select policy from the Policy Name list and then click Add Relation. Perform configuration on the
page shown in
Figure 201 .
{
Select classifier_host from the Classifier Name list.
{
Select behavior_host from the Behavior Name list.
{
Click Apply.
5. Apply the policy to an interface:
# Apply the policy named policy to the incoming packets of GigabitEthernet 0/1.
{
Select Firewall > Traffic Policing > Apply from the navigation tree, and click Apply Policy.
Perform configuration on the page shown in Figure 202 .
Figure 202 Applying the policy named policy to the incoming packets of GigabitEthernet 0/1
{
Select GigabitEthernet 0/1 from the Interface Name list.
{
Select policy from the Policy Name list.
{
Select Inbound from the Direction list.
{
Click Apply.