H3C Technologies H3C SecPath F1000-E - Manual (Page 3)

Preface
The H3C SecPath Series High-End Firewalls documentation set includes 10 configuration guides, which
describe the software features for the H3C SecPath Series High-End Firewalls and guide you through the
software configuration procedures. These configuration guides also provide configuration examples to
help you apply software features to different network scenarios.
The Network Management Configuration Guide describes how to manage interfaces, and configure
interface IP addresses, VLANs, MAC address tables, MSTP, wireless, PPPoE, Layer 2 forwarding, DHCP,
DNS, ARP, Layer 3 forwarding, UDP helper, QoS, IP routing, policy-based routing, IP multicast, and SSL.
This preface includes:
• Audience
• Conventions
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the H3C SecPath Series High-End Firewalls
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.