Configuring the secpath – H3C Technologies H3C SecPath F1000-E User Manual
Page 287
Advertising
262
Configuring the SecPath
# Specify the IP address of GigabitEthernet 0/2.
<SecPath> system-view
[SecPath] interface GigabitEthernet 0/2
[SecPath-GigabitEthernet0/2] ip address 192.168.10.100 255.255.0.0
The ping operation from Host A to Host B is unsuccessful because they are isolated at Layer 2.
# Configure local proxy ARP to implement Layer 3 communication between Host A and Host B.
[SecPath-GigabitEthernet0/2] local-proxy-arp enable
The ping operation from Host A to Host B is successful after the configuration.
Advertising
This manual is related to the following products: