Configuring rip at the cli, Rip configuration task list – H3C Technologies H3C SecPath F1000-E User Manual
Page 376
Advertising
351
Select Network > Routing Management > Routing Info from the navigation tree of SecPath A to
display learned RIP route destined for 10.0.0.0/8.
Figure 245 RIP configuration result I
2.
Display active routes of SecPath B:
Select Network > Routing Management > Routing Info from the navigation tree of SecPath B to
display learned RIP routes destined for 2.0.0.0/8 and 3.0.0.0/8.
Figure 246 RIP configuration result II
Configuring RIP at the CLI
RIP configuration task list
Item Description
Configuring RIP basic functions
Required
Configuring an additional routing metric
Optional
Configuring RIPv2 route summarization
Optional
Disabling host route reception
Optional
Optional
Advertising
This manual is related to the following products: