H3C Technologies H3C SecPath F1000-E - Manual (Page 244)

219
Figure 128 Network diagram
NOTE:
•
Before performing the following configuration, make sure that the SecPath and the host are reachable to
each other, and related configurations are done on both the SecPath and the host. For the IP addresses
of the interfaces, see Figure 128 .
• This configuration may vary with different DNS servers. The following configuration is performed on a
PC running Windows server 2000.
Configuring the DNS server
# Enter the DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS.
# Create zone com.
As shown in
Figure 129 , right click Forward Lookup Zones, select New zone, and then follow the
instructions to create a new zone named com.
Figure 129 Creating a zone
# Create a mapping between host name and IP address.