H3C Technologies H3C SecPath F1000-E User Manual
Page 699
674
[SecPathC] acl number 3001
[SecPathC-acl-adv-3001] rule deny ip source 10.110.3.100 0 destination 225.1.1.0
0.0.0.3
[SecPathC-acl-adv-3001] rule permit ip source any destination any
[SecPathC-acl-adv-3001] quit
[SecPathC] msdp
[SecPathC-msdp] peer 10.110.5.2 sa-policy export acl 3001
[SecPathC-msdp] quit
# Configure an SA message filter on SecPath D so that SecPath D will not create SA messages for
Source 2.
[SecPathD] acl number 2001
[SecPathD-acl-basic-2001] rule deny source 10.110.6.100 0
[SecPathD-acl-basic-2001] quit
[SecPathD] msdp
[SecPathD-msdp] import-source acl 2001
[SecPathD-msdp] quit
6.
Verify the configuration:
Use the display msdp sa-cache command to display the (S, G) entries cached in the SA cache on
the firewalls . For example:
# Display the (S, G) entries cached in the SA cache on SecPath C.
[SecPathC] display msdp sa-cache
MSDP Source-Active Cache Information
MSDP Total Source-Active Cache - 8 entries
MSDP matched 8 entries
(Source, Group) Origin RP Pro AS Uptime Expires
(10.110.3.100, 225.1.1.0) 1.1.1.1 ? ? 02:03:30 00:05:31
(10.110.3.100, 225.1.1.1) 1.1.1.1 ? ? 02:03:30 00:05:31
(10.110.3.100, 225.1.1.2) 1.1.1.1 ? ? 02:03:30 00:05:31
(10.110.3.100, 225.1.1.3) 1.1.1.1 ? ? 02:03:30 00:05:31
(10.110.3.100, 226.1.1.0) 1.1.1.1 ? ? 02:03:30 00:05:31
(10.110.3.100, 226.1.1.1) 1.1.1.1 ? ? 02:03:30 00:05:31
(10.110.3.100, 226.1.1.2) 1.1.1.1 ? ? 02:03:30 00:05:31
(10.110.3.100, 226.1.1.3) 1.1.1.1 ? ? 02:03:30 00:05:31
# Display the (S, G) entries cached in the SA cache on SecPath D.
[SecPathD] display msdp sa-cache
MSDP Source-Active Cache Information
MSDP Total Source-Active Cache - 4 entries
MSDP matched 4 entries
(Source, Group) Origin RP Pro AS Uptime Expires
(10.110.3.100, 226.1.1.0) 1.1.1.1 ? ? 00:32:53 00:05:07
(10.110.3.100, 226.1.1.1) 1.1.1.1 ? ? 00:32:53 00:05:07
(10.110.3.100, 226.1.1.2) 1.1.1.1 ? ? 00:32:53 00:05:07
(10.110.3.100, 226.1.1.3) 1.1.1.1 ? ? 00:32:53 00:05:07