H3C Technologies H3C SecPath F1000-E - Manual (Page 572)

547
Figure 310 Defining rules for ACL 3101
# Create ACL 3102.
{
Select Firewall > ACL from the navigation tree, and then click Add.
{
Enter 3102 for ACL Number.
{
Select Config for Match Order.
{
Click Apply.
# Define rules for ACL 3102.
{
Click the icon of ACL 3102 in the ACL list page, and then click Add.
{
Select Permit for Operation.
{
Select IP for Protocol.
{
Click Apply.
3. Configure policy aaa:
# Create node 5 for policy aaa.
{
Select Network > Routing Management > Policy Routing from the navigation tree to enter the
default policy configuration page. Then click Add and perform the following configuration as
shown in
Figure 311 .
{
Enter aaa as the policy name and 5 as node index, and set the mode to permit.
{
Enter 3101 as the number of the ACL for matching TCP packets.
{
Click Show Advanced.
{
Select GigabitEthernet 0/2 as the outbound interface.
{
Click Apply.