H3C Technologies H3C SecPath F1000-E User Manual
Page 906
881
2.
Enable IPv6 multicast routing and IPv6 administrative scoping, and enable IPv6 PIM-SM and MLD:
# Enable IPv6 multicast routing and IPv6 administrative scoping on Router A, enable IPv6 PIM-SM
on each interface, and enable MLD on the host-side interface GigabitEthernet 0/1.
<RouterA> system-view
[RouterA] multicast ipv6 routing-enable
[RouterA] pim ipv6
[RouterA-pim6] c-bsr admin-scope
[RouterA-pim6] quit
[RouterA] interface GigabitEthernet 0/1
[RouterA-GigabitEthernet0/1] mld enable
[RouterA-GigabitEthernet0/1] pim ipv6 sm
[RouterA-GigabitEthernet0/1] quit
[RouterA] interface GigabitEthernet 0/2
[RouterA-GigabitEthernet0/2] pim ipv6 sm
[RouterA-GigabitEthernet0/2] quit
The configuration on Router C and Router F is similar to that on Router A.
# On SecPath A, enable IPv6 multicast routing and IPv6 administrative scoping, and enable IPv6
PIM-SM on each interface.
<SecPathA> system-view
[SecPathA] multicast ipv6 routing-enable
[SecPathA] pim ipv6
[SecPathA-pim6] c-bsr admin-scope
[SecPathA-pim6] quit
[SecPathA] interface GigabitEthernet 0/1
[SecPathA-GigabitEthernet0/1] pim ipv6 sm
[SecPathA-GigabitEthernet0/1] quit
[SecPathA] interface GigabitEthernet 0/2
[SecPathA-GigabitEthernet0/2] pim ipv6 sm
[SecPathA-GigabitEthernet0/2] quit
[SecPathA] interface GigabitEthernet 0/3
[SecPathA-GigabitEthernet0/3] pim ipv6 sm
[SecPathA-GigabitEthernet0/3] quit
[SecPathA] interface GigabitEthernet 0/4
[SecPathA-GigabitEthernet0/4] pim ipv6 sm
[SecPathA-GigabitEthernet0/4] quit
The configuration on SecPath B, Router B, SecPath C, Router D, and Router E is similar to that on
SecPath A. (Details not shown.)
3.
Configure an IPv6 admin-scoped zone boundary:
# On SecPath A, configure GigabitEthernet 0/3 and GigabitEthernet 0/4 as the boundary of IPv6
admin-scoped zone 1.
[SecPathA] interface GigabitEthernet 0/3
[SecPathA-GigabitEthernet0/3] multicast ipv6 boundary scope 4
[SecPathA-GigabitEthernet0/3] quit
[SecPathA] interface GigabitEthernet 0/4
[SecPathA-GigabitEthernet0/4] multicast ipv6 boundary scope 4
[SecPathA-GigabitEthernet0/4] quit