H3C Technologies H3C SecPath F1000-E User Manual
Page 515
490
<SecPathC> system-view
[SecPathC] bgp 65003
[SecPathC-bgp] router-id 3.3.3.3
[SecPathC-bgp] confederation id 200
[SecPathC-bgp] confederation peer-as 65001 65002
[SecPathC-bgp] peer 10.1.2.1 as-number 65001
[SecPathC-bgp] quit
3.
Configure IBGP connections in AS65001:
# Configure SecPath A.
[SecPathA] bgp 65001
[SecPathA-bgp] peer 10.1.3.2 as-number 65001
[SecPathA-bgp] peer 10.1.3.2 next-hop-local
[SecPathA-bgp] peer 10.1.4.2 as-number 65001
[SecPathA-bgp] peer 10.1.4.2 next-hop-local
[SecPathA-bgp] quit
# Configure SecPath D.
<SecPathD> system-view
[SecPathD] bgp 65001
[SecPathD-bgp] router-id 4.4.4.4
[SecPathD-bgp] confederation id 200
[SecPathD-bgp] peer 10.1.3.1 as-number 65001
[SecPathD-bgp] peer 10.1.5.2 as-number 65001
[SecPathD-bgp] quit
# Configure SecPath E.
<SecPathE> system-view
[SecPathE] bgp 65001
[SecPathE-bgp] router-id 5.5.5.5
[SecPathE-bgp] confederation id 200
[SecPathE-bgp] peer 10.1.4.1 as-number 65001
[SecPathE-bgp] peer 10.1.5.1 as-number 65001
[SecPathE-bgp] quit
4.
Configure the EBGP connection between AS100 and AS200:
# Configure SecPath A.
[SecPathA] bgp 65001
[SecPathA-bgp] peer 200.1.1.2 as-number 100
[SecPathA-bgp] quit
# Configure SecPath F.
<SecPathF> system-view
[SecPathF] bgp 100
[SecPathF-bgp] router-id 6.6.6.6
[SecPathF-bgp] peer 200.1.1.1 as-number 200
[SecPathF-bgp] network 9.1.1.0 255.255.255.0
[SecPathF-bgp] quit
5.
Verify the configuration:
# Display BGP routing table information on SecPath B.