Figure 94 – H3C Technologies H3C SecPath F1000-E User Manual

Page 186

Advertising
background image

161

Figure 94 Enabling the DHCP service

•

Select the Enable option in the DHCP Service field.

# Configure a static address pool.

•

Click Add in the Address Pool field and perform the following configuration, as shown in

Figure 95

.

By default, the Static option is selected.

Advertising
This manual is related to the following products:

H3C SecPath F5000-A5 Firewall, H3C SecPath F1000-A-EI, H3C SecPath F1000-E-SI, H3C SecPath F1000-S-AI, H3C SecPath F5000-S Firewall, H3C SecPath F5000-C Firewall, H3C SecPath F100-C-SI, H3C SecPath F1000-C-SI, H3C SecPath F100-A-SI, H3C SecBlade FW Cards, H3C SecBlade FW Enhanced Cards, H3C SecPath U200-A U200-M U200-S, H3C SecPath U200-CA U200-CM U200-CS, H3C SecBlade LB Cards, H3C SecPath L1000-A Load Balancer

Popular Brands
Popular manuals