Configuring the dns server, N in, Figure 136 – H3C Technologies H3C SecPath F1000-E User Manual
Page 251
Advertising
226
Figure 136 Network diagram
NOTE:
•
Before performing the following configuration, make sure that the SecPath and the host are accessible to
each another via available routes, and the IP addresses of the interfaces are configured as shown
•
This configuration may vary with different DNS servers. The following configuration is performed on a
PC running Windows Server 2000.
Configuring the DNS server
# Enter the DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS.
# Create zone com.
As shown in
, right click Forward Lookup Zones, select New zone, and then follow the
instructions to create a new zone named com.
Figure 137 Creating a zone
# Create a mapping between host name and IP address.
Advertising
This manual is related to the following products: