Enabling 4-byte as number suppression, Enabling quick ebgp session reestablishment – H3C Technologies H3C SecPath F1000-E User Manual

Page 491

Advertising
background image

466

Step Command

Remarks

4.

Enable the non-standard ORF
capability for a BGP peer/peer

group.

peer { group-name | ip-address }
capability-advertise orf
non-standard

Optional.
By default, standard BGP ORF

capability defined in RFC
5291 and RFC 5292 is

supported.
If the peer supports only

non-standard ORF, you need
to configure this command.

5.

Enable the ORF capability for a

BGP peer/peer group.

peer { group-name | ip-address }

capability-advertise orf ip-prefix
{ both | receive | send }

Disabled by default.

Table 70 Description of the both, send, and receive parameters and the negotiation result

Local parameter

Peer parameter

Negotiation result

send

receive

both

The ORF sending capability is enabled locally and
the ORF receiving capability is enabled on the peer.

receive

send

both

The ORF receiving capability is enabled locally and
the ORF sending capability is enabled on the peer.

both both

Both the ORF sending and receiving capabilities are
enabled locally and on the peer, respectively.

Enabling 4-byte AS number suppression

The device supports 4-byte AS numbers and uses 4-byte AS numbers by default. If the peer devices
support only 2-byte AS numbers, you must enable the 4-byte AS number suppression function on the

device.
To enable 4-byte AS number suppression:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter BGP view.

bgp as-number

N/A

3.

Enable 4-byte AS number
suppression.

peer { group-name | ip-address }
capability-advertise

suppress-4-byte-as

Disabled by default.

NOTE:

If the peer device supports 4-byte AS numbers, do not enable the 4-byte AS number suppression function;
otherwise, the BGP peer relationship cannot be established.

Enabling quick EBGP session reestablishment

If the router receives no keepalive messages from a BGP peer within the holdtime, it disconnects from the

peer.
With quick EBGP connection reestablishment enabled, the router, when the link to a directly connected

EBGP peer is down, will reestablish a session to the EBGP peer immediately.

Advertising