H3C Technologies H3C SecPath F1000-E User Manual
Page 573
Advertising
548
Figure 311 Creating node 5 for policy aaa
# Create node 10 for policy aaa.
{
Click Add on the policy configuration page and perform the following configuration as shown
in
{
Enter aaa as the policy name and 10 as node index, and set the mode to deny.
{
Enter 3102 as the number of the ACL for matching all IP packets.
{
Enter next hop 1.1.1.1. (Configure the next hop based on your network environment.)
{
Click Apply.
Advertising
This manual is related to the following products: