H3C Technologies H3C SecPath F1000-E - Manual (Page 629)

604
Configuring PIM-SM
Task Remarks
Globally enable multicast routing
Required.
Globally enable multicast routing after selecting Network > Routing
Management > Multicast Routing. For more information, see
"Configuring multicast routing and forwarding."
By default, multicast routing is globally disabled.
Configuring PIM interfaces
Required.
Enable PIM-SM on an interface.
By default, PIM is disabled on an interface.
Configuring advanced PIM features
Optional.
• Enable the auto-RP function, which is disabled by default.
• Configure the register message checksum and calculation method.
Displaying PIM neighbor information Optional.
Configuring PIM-SSM
Task Remarks
Globally enable multicast routing
Required.
Globally enable multicast routing after selecting Network > Routing
Management > Multicast Routing. For more information, see
"Configuring multicast routing and forwarding."
By default, multicast routing is globally disabled.
Configuring PIM interfaces
Required.
Enable PIM-SSM on an interface.
By default, PIM is disabled on an interface.
Configuring advanced PIM features
Optional.
Configure the SSM group range. By default, the SSM group range is
232.0.0.0/8.
Displaying PIM neighbor information Optional.
Configuring PIM interfaces
1. Select Network > Routing Management > PIM from the navigation tree.
The PIM interface configuration page appears.
2. Click the icon of the specified interface.
The configuration page appears.
3. Configure PIM interface as described in Table 79 .
4. Click Apply.