H3C Technologies H3C SecPath F1000-E User Manual
Page 396
371
[RouterC] rip 1
[RouterC-rip-1] network 11.0.0.0
[RouterC-rip-1] version 2
[RouterC-rip-1] undo summary
[RouterC-rip-1] quit
# Configure RIP to redistribute the routes from OSPF process 1 and direct routes on SecPath.
[SecPath-rip-1] import-route direct
[SecPath-rip-1] import-route ospf 1
# Display the routing table information of Router C.
[RouterC] display ip routing-table
Routing Tables: Public
Destinations : 10 Routes : 10
Destination/Mask Proto Pre Cost NextHop Interface
10.1.1.0/24 RIP 100 1 11.3.1.1 Eth1/1
10.2.1.0/24 RIP 100 1 11.3.1.1 Eth1/1
10.5.1.0/24 RIP 100 1 11.3.1.1 Eth1/1
10.6.1.0/24 RIP 100 1 11.3.1.1 Eth1/1
11.3.1.0/24 Direct 0 0 11.3.1.2 Eth1/1
11.3.1.2/32 Direct 0 0 127.0.0.1 InLoop0
11.4.1.0/24 Direct 0 0 11.4.1.2 Eth1/2
11.4.1.2/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
4.
Configure route summarization on SecPath and advertise only the summary route 10.0.0.0/8:
[SecPath] interface gigabitethernet 0/2
[SecPath-GigabitEthernet0/2] rip summary-address 10.0.0.0 8
# Display the routing table information of Router C.
[RouterC] display ip routing-table
Routing Tables: Public
Destinations : 7 Routes : 7
Destination/Mask Proto Pre Cost NextHop Interface
10.0.0.0/8 RIP 100 1 11.3.1.1 Eth1/1
11.3.1.0/24 Direct 0 0 11.3.1.2 Eth1/1
11.3.1.2/32 Direct 0 0 127.0.0.1 InLoop0
11.4.1.0/24 Direct 0 0 11.4.1.2 Eth1/2
11.4.1.2/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0