H3C Technologies H3C SecPath F1000-E - Manual (Page 547)

522
[SecPathC] interface GigabitEthernet 4/3
[SecPathC-GigabitEthernet4/3] isis enable 1
[SecPathC-GigabitEthernet4/3] quit
# Configure SecPath D.
<SecPathD> system-view
[SecPathD] isis 1
[SecPathD-isis-1] is-level level-2
[SecPathD-isis-1] network-entity 20.0000.0000.0004.00
[SecPathD-isis-1] quit
[SecPathD] interface GigabitEthernet 4/2
[SecPathD-GigabitEthernet4/2] isis enable 1
[SecPathD-GigabitEthernet4/2] quit
[SecPathD] interface GigabitEthernet 4/1
[SecPathD-GigabitEthernet 4/1] isis enable 1
[SecPathD-GigabitEthernet 4/1] quit
3. Verify the configuration:
# Display the IS-IS LSDB information of each router.
[SecPathA] display isis lsdb
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
--------------------------------------------------------------------------
0000.0000.0001.00-00* 0x0000000d 0xb184 879 68 0/0/0
0000.0000.0002.00-00 0x0000000c 0xcf65 493 68 0/0/0
0000.0000.0003.00-00 0x00000013 0x2f38 594 111 1/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
[SecPathB] display isis lsdb
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
--------------------------------------------------------------------------
0000.0000.0001.00-00 0x0000000d 0xb184 707 68 0/0/0
0000.0000.0002.00-00* 0x0000000c 0xcd66 1167 68 0/0/0
0000.0000.0003.00-00 0x00000013 0x2d39 1136 111 1/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload