H3C Technologies H3C SecPath F1000-E User Manual
Page 553
528
# Display information about IS-IS interfaces of SecPath A.
[SecPathA] display isis interface
Interface information for ISIS(1)
---------------------------------
Interface: GigabitEthernet4/1
Id IPV4.State IPV6.State MTU Type DIS
001 Up Down 1497 L1/L2 Yes/Yes
After the DIS priority configuration, you can see SecPath A is the DIS for Level-1-2, and the
pseudonode is 0000.0000.0001.01.
# Display information about IS-IS neighbors and interfaces of SecPath C.
[SecPathC] display isis peer
Peer information for ISIS(1)
----------------------------
System Id: 0000.0000.0001
Interface: GigabitEthernet4/1 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 7s Type: L1 PRI: 100
System Id: 0000.0000.0002
Interface: GigabitEthernet4/1 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 23s Type: L1 PRI: 64
[SecPathC] display isis interface
Interface information for ISIS(1)
---------------------------------
Interface: GigabitEthernet4/1
Id IPV4.State IPV6.State MTU Type DIS
001 Up Down 1497 L1/L2 No/No
# Display information about IS-IS neighbors and interfaces of SecPath D.
[SecPathD] display isis peer
Peer information for ISIS(1)
----------------------------
System Id: 0000.0000.0001
Interface: GigabitEthernet4/1 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 7s Type: L2 PRI: 100
System Id: 0000.0000.0002
Interface: GigabitEthernet4/1 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 26s Type: L2 PRI: 64
[SecPathD] display isis interface
Interface information for ISIS(1)
---------------------------------
Interface: GigabitEthernet4/1