Configuring interface rip – H3C Technologies H3C SecPath F1000-E User Manual
Page 373
Advertising
348
Figure 240 RIP global configuration page
2.
Configure RIP globally as described in
.
Table 59 Configuration items
Item Description
Enable RIP (enable all interfaces automatically)
Enable RIP on all interfaces.
Import static routes
Configure RIP to redistribute static routes.
Configuring interface RIP
1.
Select Network > Routing Management > RIP from the navigation tree.
The RIP configuration page appears. If RIP is enabled, the More button is displayed.
2.
Click More.
The hidden RIP interface list appears.
Figure 241 Interface configuration page
3.
Click the
icon.
The RIP interface configuration page appears.
Advertising
This manual is related to the following products: