30 can on board: pred.connect.set, Can on board: pred.connect.set, 5drive interface – Lenze E94AxPExxxx User Manual
Page 126
5
Drive interface
5.2
Device commands
126
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.30
CAN on board: Pred.Connect.Set
The
= "93: CAN on board: Pred.Connect.Set" device command is used to set the basic
identifiers for the CANopen system bus interface of the controller ("CAN on board") according to the
"Predefined Connection Set" (DS301V402).
Tip!
For detailed information about the "CAN on board" CANopen system bus interface, please
see the "CAN" Communication Manual.
Possible status displays for this device command
Related device commands
Status (
Meaning
6128898 Device command in process
6094848 Device command executed successfully
6094849 General error