3 mode 0: brake control is switched off, Mode 0: brake control is switched off, 12 basic drive functions – Lenze E94AxPExxxx User Manual
Page 569
![background image](/manuals/566084/569/background.png)
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
569
12
Basic drive functions
12.12
Brake control
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.12.3
Mode 0: Brake control is switched off
If the mode 0 is selected in
, the brake control is switched off.
• If a motor brake control module is available, it will not be triggered.
• The brake monitoring function is not active.
• A potential fault reported by the brake control is reset automatically.
• The output signals of the system block LS_Brake are reset:
• BRK_dnState = 0
• BRK_bReleaseBrakeOut = FALSE
• BRK_bBrakeReleased = FALSE
• BRK_bError = FALSE
Note!
In the Lenze setting, the mode 0 is preset to get into a safe state after the mains is
switched on.