Lenze E94AxPExxxx - Manual (Page 145)

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
145
5 Drive interface
5.2 Device commands
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.45 Restart controller
The C00002 = "11000: Restart controller" device command is used to restart the controller via
parameter setting.
• Only possible when the application has stopped and the controller is inhibited.
Possible status displays for this device command
Status ( C00003 ) Meaning
720930050 Device command in process
720896001 General error

Note!
Due to the restart at the successful execution of the device command, this status is no
longer displayed in C00003 .
If this device command is used, the message "Undervoltage in the DC bus (0x007b000f)"
may appear in the logbook.