35 unbind/bind ethernet module mxi2, Unbind/bind ethernet module mxi2, 5drive interface – Lenze E94AxPExxxx User Manual
Page 131
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
131
5
Drive interface
5.2
Device commands
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.35
Unbind/bind Ethernet module MXI2
The
= "102: Unbind/bind Ethernet module: MXI2" device command is used to reinitialise
the Ethernet interface of an Ethernet communication module in module slot MXI2, e. g. to accept a
newly set IP or gateway address without mains switching.
Tip!
Detailed information on the Ethernet communication module (E94AYCEN) can be found in
the "Ethernet" Communication Manual.
Possible status displays for this device command
Related device commands
Unbind/bind Ethernet module MXI1
Status (
Meaning
6718722 Device command in process
6684672 Device command executed successfully
6684673 General error