Lenze E94AxPExxxx - Manual (Page 740)

15 Parameter reference
15.1 Structure of the parameter descriptions
740
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
15.1.2 Parameters with read-only access
Parameters for which the "write access" attribute has not been set can only be read and not be
changed by the user.
Description structure
Representation in the »Engineer«
The »Engineer« displays these parameters with a grey background or, with an online connection,
with a pale-yellow background:
15.1.3 Parameters with write access
Only parameters with a check mark () in front of the "write access" attribute can be changed by
the user. The Lenze setting for these parameters is printed in bold.
• The settings can either be selected from a selection list or the values can be entered directly.
• Values outside the valid setting range are represented in red in the »Engineer«.
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Display range
(min. value | unit | max. value)
 Read access  Write access  CINH  PLC STOP  No transfer