7encoder evaluation – Lenze E94AxPExxxx User Manual
Page 286
7
Encoder evaluation
7.3
Parameter setting
286
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
How to get to the dialog for setting the encoder evaluation parameters:
1. Go to the Project view of the »Engineer« and select the»9400 ServoPLC«.
2. Select the Application parameters tab from the Workspace.
3. Click the button All basic functions in the Overview dialog level.
4. Click the button Encoder evaluation in the dialog level Overview All basic functions.
Parameterisation dialog in the »Engineer«
See also:
ENC_bError
-
Resolver: cos gain
100 %
Resolver: sine gain
100 %
Resolver: Angle correction
0
Parameter
Info
Lenze setting
Value Unit
Highlighted in grey = display parameter